Took about 20 minutes.
How many people here can fix an old clothes dryer?
Fixed My Dryer
-
Martin Hash
- Posts: 18718
- Joined: Wed Jan 20, 2010 2:02 pm
Fixed My Dryer
Shamedia, Shamdemic, Shamucation, Shamlection, Shamconomy & Shamate Change
-
Ph64
- Posts: 2434
- Joined: Wed Feb 08, 2017 10:34 pm
Re: Fixed My Dryer
I'm sure I could... I fixed my washing machine (that came with the house when I bought it... 29 years ago now), the drain pump seized up... $40 for the replacement pump, pulled the washer away from the wall and tilted it back, 30 minutes maybe with a screwdriver and wrench... Well, and I got a tad wet from the water that I couldn't bail out manually (obviously it wouldn't drain) that gushed out when I disconnected the hoses, but c'est la vie?
Depends of course on what the problem is and if you can find the part(s). For intance I have a spare igniter coil on the shelf for my furnace... I've replaced two in 30 years, after the first I bought a spare for $30, and immediately bought another when I had to use that one. Though I could use a totally new furnace at this point, but nothing beats having the part just sitting on your shelf when the furnace dies and it's 10F out.
I grew up around a TV repairman grandfather, so I can fix most old CRT TVs/Monitors too. The new surface mount stuff though is a lot tougher to deal with though. Even with good magnifying specs it's hard soldering accurately on something 6mm long, or a transistor or IC with .3mm leads.
Depends of course on what the problem is and if you can find the part(s). For intance I have a spare igniter coil on the shelf for my furnace... I've replaced two in 30 years, after the first I bought a spare for $30, and immediately bought another when I had to use that one. Though I could use a totally new furnace at this point, but nothing beats having the part just sitting on your shelf when the furnace dies and it's 10F out.
I grew up around a TV repairman grandfather, so I can fix most old CRT TVs/Monitors too. The new surface mount stuff though is a lot tougher to deal with though. Even with good magnifying specs it's hard soldering accurately on something 6mm long, or a transistor or IC with .3mm leads.
"People don't like to be meddled with. We tell them what to do, what to think, don't run, don't walk. We're in their homes and in their heads and we haven't the right. We're meddlesome."
-
Xenophon
- Posts: 2713
- Joined: Wed Nov 30, 2016 6:41 am
Re: Fixed My Dryer
I can. Our roller went out, so I had to go up the street to the appliance guy's house, and he just gave me one. I went back to the house and replaced it. I found a lot of change, too. I actually made money on that repair.Martin Hash wrote: ↑Wed Nov 18, 2020 11:10 pmTook about 20 minutes.
How many people here can fix an old clothes dryer?
-
SuburbanFarmer
- Posts: 25278
- Joined: Wed Nov 30, 2016 6:50 am
- Location: Ohio
Re: Fixed My Dryer
I took mine apart several times last year. Replaced the belt, rollers, and heating unit.
-
Martin Hash
- Posts: 18718
- Joined: Wed Jan 20, 2010 2:02 pm
Re: Fixed My Dryer
Damn, you guys are my kind of people.
Shamedia, Shamdemic, Shamucation, Shamlection, Shamconomy & Shamate Change
-
Ph64
- Posts: 2434
- Joined: Wed Feb 08, 2017 10:34 pm
Re: Fixed My Dryer
I was raised to always try to fix something before resorting to buying something "new".
"People don't like to be meddled with. We tell them what to do, what to think, don't run, don't walk. We're in their homes and in their heads and we haven't the right. We're meddlesome."
-
Hastur
- Posts: 5297
- Joined: Wed Nov 30, 2016 2:43 am
- Location: suiþiuþu
Re: Fixed My Dryer
I've fixed our dishwasher several times. Siemens didn't anticipate pine nuts.
Last week my son broke his DXRacer Formula F08 gaming chair. I found a spare part on Amazon Germany. It cost me $38 including shipping. Easy fix after that.
Last week my son broke his DXRacer Formula F08 gaming chair. I found a spare part on Amazon Germany. It cost me $38 including shipping. Easy fix after that.
An nescis, mi fili, quantilla prudentia mundus regatur? - Axel Oxenstierna
Nie lügen die Menschen so viel wie nach einer Jagd, während eines Krieges oder vor Wahlen. - Otto von Bismarck
-
C-Mag
- Posts: 28305
- Joined: Tue Nov 29, 2016 10:48 pm
Re: Fixed My Dryer
Me preparing to fix the dishwasher
PLATA O PLOMO
Don't fear authority, Fear Obedience
Don't fear authority, Fear Obedience
-
Haumana
- Posts: 4149
- Joined: Wed Nov 30, 2016 9:48 am
-
Ph64
- Posts: 2434
- Joined: Wed Feb 08, 2017 10:34 pm
Re: Fixed My Dryer
"People don't like to be meddled with. We tell them what to do, what to think, don't run, don't walk. We're in their homes and in their heads and we haven't the right. We're meddlesome."
