Preparing for Uncertainty and Self Reliance

User avatar
C-Mag
Posts: 28305
Joined: Tue Nov 29, 2016 10:48 pm

Re: Preparing for Uncertainty and Self Reliance

Post by C-Mag » Sun Mar 27, 2022 2:38 pm

Haumana wrote:
Sun Mar 27, 2022 1:06 pm
C-Mag wrote:
Sun Mar 27, 2022 10:10 am
Self sufficient, building skills, banking resources. Way to go my Hawaiian brother.


Do you have a meat grinder yet.
HA! No. But I am in the market for one. That was the wife's first response, to which I said that I have been googling about for one. Shit, I am thinking about setting up a stall at the local farmer's market and selling sausages. We make killer food.
That's awesome.
I recommend no smaller than a #12 Like this LEM.
https://www.lemproducts.com/product/big ... t-grinders

They are a solid Grinder, I ran one for years before I upgraded and went to a #22.
PLATA O PLOMO


Image


Don't fear authority, Fear Obedience

User avatar
The Conservative
Posts: 14790
Joined: Wed Nov 30, 2016 9:43 am

Re: Preparing for Uncertainty and Self Reliance

Post by The Conservative » Sun Mar 27, 2022 4:05 pm

C-Mag wrote:
Sun Mar 27, 2022 2:38 pm
Haumana wrote:
Sun Mar 27, 2022 1:06 pm
C-Mag wrote:
Sun Mar 27, 2022 10:10 am
Self sufficient, building skills, banking resources. Way to go my Hawaiian brother.


Do you have a meat grinder yet.
HA! No. But I am in the market for one. That was the wife's first response, to which I said that I have been googling about for one. Shit, I am thinking about setting up a stall at the local farmer's market and selling sausages. We make killer food.
That's awesome.
I recommend no smaller than a #12 Like this LEM.
https://www.lemproducts.com/product/big ... t-grinders

They are a solid Grinder, I ran one for years before I upgraded and went to a #22.
I'd figured you for someone who would do it by hand...
#NotOneRedCent

User avatar
C-Mag
Posts: 28305
Joined: Tue Nov 29, 2016 10:48 pm

Re: Preparing for Uncertainty and Self Reliance

Post by C-Mag » Sun Mar 27, 2022 4:27 pm

The Conservative wrote:
Sun Mar 27, 2022 4:05 pm

I'd figured you for someone who would do it by hand...
By hand is fine for a few pounds, but the volume I do is not very practicable. We did a bull last Winter and we ground 370 pounds, and you have to grind it at least twice.

I use a ProCut #22
Image

It's a Pig, weighs 134 lbs.
PLATA O PLOMO


Image


Don't fear authority, Fear Obedience

User avatar
The Conservative
Posts: 14790
Joined: Wed Nov 30, 2016 9:43 am

Re: Preparing for Uncertainty and Self Reliance

Post by The Conservative » Sun Mar 27, 2022 5:07 pm

C-Mag wrote:
Sun Mar 27, 2022 4:27 pm
The Conservative wrote:
Sun Mar 27, 2022 4:05 pm

I'd figured you for someone who would do it by hand...
By hand is fine for a few pounds, but the volume I do is not very practicable. We did a bull last Winter and we ground 370 pounds, and you have to grind it at least twice.

I use a ProCut #22
Image

It's a Pig, weighs 134 lbs.
That makes sense, and I agree. This would be a good addition.
#NotOneRedCent

User avatar
C-Mag
Posts: 28305
Joined: Tue Nov 29, 2016 10:48 pm

Re: Preparing for Uncertainty and Self Reliance

Post by C-Mag » Sun Mar 27, 2022 6:44 pm

The Conservative wrote:
Sun Mar 27, 2022 5:07 pm
C-Mag wrote:
Sun Mar 27, 2022 4:27 pm
The Conservative wrote:
Sun Mar 27, 2022 4:05 pm

I'd figured you for someone who would do it by hand...
By hand is fine for a few pounds, but the volume I do is not very practicable. We did a bull last Winter and we ground 370 pounds, and you have to grind it at least twice.

I use a ProCut #22
Image

It's a Pig, weighs 134 lbs.
That makes sense, and I agree. This would be a good addition.
Good machines are not cheap.
The LEM is good bang for the buck. The one I suggested to Haumana is a little over $500.
The monster I got was nearly $1600.

If Haumana can get his raw materials for free, and sell at the local market........... It's worth it.
PLATA O PLOMO


Image


Don't fear authority, Fear Obedience

User avatar
The Conservative
Posts: 14790
Joined: Wed Nov 30, 2016 9:43 am

Re: Preparing for Uncertainty and Self Reliance

Post by The Conservative » Sun Mar 27, 2022 8:32 pm

C-Mag wrote:
Sun Mar 27, 2022 6:44 pm
The Conservative wrote:
Sun Mar 27, 2022 5:07 pm
C-Mag wrote:
Sun Mar 27, 2022 4:27 pm


By hand is fine for a few pounds, but the volume I do is not very practicable. We did a bull last Winter and we ground 370 pounds, and you have to grind it at least twice.

I use a ProCut #22
Image

It's a Pig, weighs 134 lbs.
That makes sense, and I agree. This would be a good addition.
Good machines are not cheap.
The LEM is good bang for the buck. The one I suggested to Haumana is a little over $500.
The monster I got was nearly $1600.

If Haumana can get his raw materials for free, and sell at the local market........... It's worth it.
I always pay extra for good quality... What I don't do is pay extra for shit, that's good to know.
#NotOneRedCent

User avatar
Haumana
Posts: 4149
Joined: Wed Nov 30, 2016 9:48 am

Re: Preparing for Uncertainty and Self Reliance

Post by Haumana » Mon Mar 28, 2022 1:10 pm

C-Mag wrote:
Sun Mar 27, 2022 2:38 pm
Haumana wrote:
Sun Mar 27, 2022 1:06 pm
C-Mag wrote:
Sun Mar 27, 2022 10:10 am
Self sufficient, building skills, banking resources. Way to go my Hawaiian brother.


Do you have a meat grinder yet.
HA! No. But I am in the market for one. That was the wife's first response, to which I said that I have been googling about for one. Shit, I am thinking about setting up a stall at the local farmer's market and selling sausages. We make killer food.
That's awesome.
I recommend no smaller than a #12 Like this LEM.
https://www.lemproducts.com/product/big ... t-grinders

They are a solid Grinder, I ran one for years before I upgraded and went to a #22.
Thanks for the recommendation and review. I've been checking out LEMs already but good to hear from out a trusted source!

User avatar
Haumana
Posts: 4149
Joined: Wed Nov 30, 2016 9:48 am

Re: Preparing for Uncertainty and Self Reliance

Post by Haumana » Fri Apr 08, 2022 11:38 pm

I get to butcher a pig tomorrow! I could have had a piglet today but it involved tracking and searching but I had to work. Dude is gonna shoot another tomorrow morning though and I am ready.

User avatar
Martin Hash
Posts: 18721
Joined: Wed Jan 20, 2010 2:02 pm

Re: Preparing for Uncertainty and Self Reliance

Post by Martin Hash » Fri Apr 08, 2022 11:50 pm

I can smell the testosterone.
Shamedia, Shamdemic, Shamucation, Shamlection, Shamconomy & Shamate Change

User avatar
SuburbanFarmer
Posts: 25278
Joined: Wed Nov 30, 2016 6:50 am
Location: Ohio

Re: Preparing for Uncertainty and Self Reliance

Post by SuburbanFarmer » Sat Apr 09, 2022 6:31 am

Martin Hash wrote:
Fri Apr 08, 2022 11:50 pm
I can smell the testosterone.
Yeah take a shower bro. :)

I love hearing about this backyard meat processing operation. Start selling to the neighbors now, so your business is ready to go when SHTF.
SJWs are a natural consequence of corporatism.

Formerly GrumpyCatFace

https://youtu.be/CYbT8-rSqo0