That's awesome.
I recommend no smaller than a #12 Like this LEM.
https://www.lemproducts.com/product/big ... t-grinders
They are a solid Grinder, I ran one for years before I upgraded and went to a #22.
That's awesome.
I'd figured you for someone who would do it by hand...C-Mag wrote: ↑Sun Mar 27, 2022 2:38 pmThat's awesome.
I recommend no smaller than a #12 Like this LEM.
https://www.lemproducts.com/product/big ... t-grinders
They are a solid Grinder, I ran one for years before I upgraded and went to a #22.
By hand is fine for a few pounds, but the volume I do is not very practicable. We did a bull last Winter and we ground 370 pounds, and you have to grind it at least twice.The Conservative wrote: ↑Sun Mar 27, 2022 4:05 pm
I'd figured you for someone who would do it by hand...
That makes sense, and I agree. This would be a good addition.C-Mag wrote: ↑Sun Mar 27, 2022 4:27 pmBy hand is fine for a few pounds, but the volume I do is not very practicable. We did a bull last Winter and we ground 370 pounds, and you have to grind it at least twice.The Conservative wrote: ↑Sun Mar 27, 2022 4:05 pm
I'd figured you for someone who would do it by hand...
I use a ProCut #22
It's a Pig, weighs 134 lbs.
Good machines are not cheap.The Conservative wrote: ↑Sun Mar 27, 2022 5:07 pmThat makes sense, and I agree. This would be a good addition.C-Mag wrote: ↑Sun Mar 27, 2022 4:27 pmBy hand is fine for a few pounds, but the volume I do is not very practicable. We did a bull last Winter and we ground 370 pounds, and you have to grind it at least twice.The Conservative wrote: ↑Sun Mar 27, 2022 4:05 pm
I'd figured you for someone who would do it by hand...
I use a ProCut #22
It's a Pig, weighs 134 lbs.
I always pay extra for good quality... What I don't do is pay extra for shit, that's good to know.C-Mag wrote: ↑Sun Mar 27, 2022 6:44 pmGood machines are not cheap.The Conservative wrote: ↑Sun Mar 27, 2022 5:07 pmThat makes sense, and I agree. This would be a good addition.
The LEM is good bang for the buck. The one I suggested to Haumana is a little over $500.
The monster I got was nearly $1600.
If Haumana can get his raw materials for free, and sell at the local market........... It's worth it.
Thanks for the recommendation and review. I've been checking out LEMs already but good to hear from out a trusted source!C-Mag wrote: ↑Sun Mar 27, 2022 2:38 pmThat's awesome.
I recommend no smaller than a #12 Like this LEM.
https://www.lemproducts.com/product/big ... t-grinders
They are a solid Grinder, I ran one for years before I upgraded and went to a #22.
Yeah take a shower bro.